0501 : V150+ Core Drill and Support Stand
For wet and dry / raised hand or support stand core drilling.
3-speed motor with progressive start.
Triple protection for the motor for long lift and user safety.
Quick, tool-free attachment to the support stand.
Core drill:
Hand core drilling facilitated:
1900 W motor with triple protection.
- Electronic (in the event of overload on the motor) with alert light in the trigger,
- Thermal (in the event of overheating),
- Mechanical (axis decoupling if the core bit locks).
3 speeds: 550/1250/2700 tr/min (rotation under load).
Ready to use : the water and dust aspiration end pieces are built-in.
Practical transport in its case.
UNC connection 1.1/4", 1/2".
PRCD protection switch.
Support stand:
Aluminium column support stand and reinforcement bars to minimise vibration.
Drilling over the full height of the stand (scale in mm); Can be tilted from 0° to 45°; Spirit level.
Adjustable brake; Stop button; easy positioning of the V150+.
Practical: centring indicator and built-in level.
Maximum stability: base with 4 adjustment nuts, can be used fixed by anchor spindle or with vacuum pump
Right/left movement lever, movable without tools.
Dimensions (L x w x H): 350 x 250 x 1110 mm.
| Description | Power W | kg |
|---|---|---|
| V 150+ Motor and support stand | 1900 | 19,500 |
| V 150+ Support stand | - | 13,000 |
| V 150+ Motor | 1900 | 6,500 |
| REF |
|---|
| 050110 |
| 050111 |
| 050116 |
Capacities
Delivered with
Tips
Wet drilling for reinforced concrete, abrasive materials, etc.:
- Raised hand: Ø max 82 mm,
- On support stand: Ø max 152 mm.
Dry drilling for brick, breeze block, hollow materials:
- Raised hand: Ø max 200 mm (requires the use of the centre bit ref. 050158),
- On support stand: Ø max 152 mm.
Core drill:
Side handle,
2 flat wrenches (SW 32 and SW 41),
Sprinkler mechanism with bearing tap,
Dust suction mechanism,
Plastic transport case,
Support stand:
Ready to use attachment set (anchor spindle, reusable pegs for attachment in breeze block, non reusable pegs for attachment in concrete).
Delivered without core bit.
The use of a water and dust vacuum (ref. 050157) is strongly recommended for dry core drilling.
