For wet core drilling on support stand.
Powerful 2-speed motor for frequent use.
Quadruple protection for the motor for long lift and user safety.
1 single support stand for the 2 core drills V 250 and V 350.
2500 W motor with triple protection:
. Electronic (in the event of overload on the motor) with alert light in the trigger,
- Thermal (in the event of overheating),
- Mechanical (axis decoupling if the core bit locks).
Fourth protection for the motor and gears thanks to an oil pumping system that enables permanent lubrication.
2 speeds: 360/850 rpm (rotation under load).
UNC connection 1.1/4".
PRCD protection switch.
Aluminium column support stand and reinforcement bars to minimise vibration.
Drilling over the full height of the stand (scale in mm); Can be tilted from 0° to 45°.
Adjustable brake; Stop button; easy positioning of the V150+.
Practical: centring indicator and built-in level.
Maximum stability: base with 4 adjustment nuts, can be used fixed by anchor spindle or with vacuum pump
Right/left movement lever, movable without tools.
Wheels and handle to facilitate transport.
Dimensions (L x w x H) : 538 x 330 x 1110 mm.
|V 250 motor and support stand||2500||32,500|
|V 250 / V 350 support stand||-||22,000|
|V 250 motor||2500||10,500|
Wet drilling on support stand for reinforced concrete, abrasive materials, bricks, breeze block, etc. up to Ø 250 mm.
2 flat wrenches (SW 32 and SW 41),
Sprinkler mechanism with bearing tap.
Ready to use attachment set (anchor spindle, reusable pegs for attachment in breeze block, non reusable pegs for attachment in concrete).
Delivered without core bit.
The use of a water and dust vacuum (ref. 050057) is strongly recommended for dry core drilling.