2501 : Crossbow Bender
Light weight alloy body.
For annealed copper pipes: Ø 10 to 22 mm. - Wall thickness: 1 mm.
For PEX/AL/PEX pipes: Ø 10 to 26 mm.
Bending radius: 3 to 4 O.D. Bending angle: up to 90°.
Supplied in a plastic case.
TIP: For copper pipes annealed using a blow-torch: Only anneal the area of the bend to avoid weakening the pipe close to counter former. Do not anneal the section of pipe in contact with the counter former to avoid deformation.
| For pipe | Composition | kg |
|---|---|---|
| Copper | Ø 10 - 12 - 14 - 16 - 18 - 20 - 22 mm | 5,150 |
| Copper | Ø 10 - 12 - 15 - 18 - 22 mm | 4,830 |
| Copper | Ø 18 - 22 mm | 4,100 |
| Copper | Ø 3/8 - 1/2 - 5/8 - 3/4 - 7/8" | 4,900 |
| PEX/AL/PEX | Ø 16 - 20 - 26 mm | 4,285 |
| PEX/AL/PEX | Ø 14 - 16 - 18 - 20 - 26 mm | 5,440 |
| REF |
|---|
| 250100 |
| 250101 |
| 250102 |
| 250103 |
| 250104 |
| 250151 |
