0501 : V 150+ Core Drill and Support Stand
For wet and dry / raised hand or support stand core drilling.
3-speed motor with progressive start.
Triple protection for the motor for long lift and user safety.
Quick, tool-free attachment to the support stand.
Core drill:
Hand core drilling facilitated:
1900 W motor with triple protection.
- Electronic (in the event of overload on the motor) with alert light in the trigger,
- Thermal (in the event of overheating),
- Mechanical (axis decoupling if the core bit locks).
3 speeds: 550/1250/2700 tr/min (rotation under load).
Ready to use : the water and dust aspiration end pieces are built-in.
UNC connection 1.1/4", 1/2".
PRCD protection switch.
Support stand:
Aluminium column support stand and reinforcement bars to minimise vibration.
Drilling over the full height of the stand (scale in mm); Can be tilted from 0° to 45°.
Adjustable brake; Stop button; easy positioning of the V150+.
Practical: centring indicator and built-in level.
Maximum stability: base with 4 adjustment nuts, can be used fixed by anchor spindle or with vacuum pump
Right/left movement lever, movable without tools.
Dimensions (L x w x H): 350 x 250 x 1110 mm.
| Sku | Description | Power W | kg |
|---|---|---|---|
| 050110 |
V 150+ Motor and support stand |
1900 |
19,500 |
| 050111 |
V 150+ Support stand |
- |
13,000 |
| 050116 |
V 150+ Motor |
1900 |
6,500 |
| 990022 |
V 150+ Motor and support stand + Core bit Ø 127 mm |
1900 |
23,200 |
| 990023 |
V 150+ Motor and support stand + Core bit Ø 127 mm + Manual water pump + Centring bit |
1900 |
30,200 |
| Capacity | Wet drilling for reinforced concrete, abrasive materials, etc.: |
|---|---|
| Tips | The use of a water and dust vacuum (ref. 050157) is strongly recommended for dry core drilling. |
| Supplied with | Core drill: |
